10.0.0.1 - Login Admin

The 10.0.0.1 IP Address

Simply put, IP addresses are labels used to identify devices on a computer network. Having an IP address allows a device to connect and communicate with other devices over an IP-based network, with the most common example being the internet.

Your Internet service provider gets IP addresses from Regional Internet Registries (RIRs), which assign the numbers to you. 

So you don’t directly connect to the Internet – you connect to a network – and that network grants you access. 

Let’s delve in and explore why people are often confused about IP addresses and what to avoid — for a seamless Internet connection, your router provides a gateway to connect mobile phones, computers, and other devices to the Internet — by assigning local IP addresses to each.

The Internet Protocol v4 (IPv4) is a core Internet protocol, with over four billion free-to-allocate IP addresses provided by RIRs. 

This is where the 10.0.0.1 private IP address comes into the picture. Many router manufacturers use the 10.0.0.1 private IP address to set up routers on a network to provide Internet access. They remap different IP address spaces onto other addresses so you can use the Internet.

Common Mistypes — For IP Addresses

When setting up a router, people often misspell the IP addresses on the search bar. The typo doesn’t lead you to any page. Here’s what people often (mis)type in the address bar:

Incorrect: 10.0.0.0.1

Correct: 10.0.0.1

Incorrect: 1.0.0.0.1

Correct: 10.0.0.1

Incorrect: 1.0.0.0.1

Correct: 10.0.01

Incorrect: http://10.0.0.0.1

Correct: http://10.0.0.1

Incorrect: https://10.0.0.0.1

Correct: https://10.0.0.1

Incorrect: 10.0.0.0.1 login

Correct: 10.0.0.1 login

Incorrect: 10.0.0.0.1 admin

Correct: 10.0.0.1 admin

All of these will not yield any result and may lead to the ‘this site cannot be reached’ error. Even the autocomplete feature for browsers often suggests – 10.0.0.0.1 instead of 10.0.0.1 – as the mistype is so common.

What You Can Change With 10.0.0.1 — Frequent Settings

If you can’t find the username and password for a router, here’s a list of default router passwords and usernames that may help you. If you cannot recall the username and password, you will have to reset the router to default settings. This restores the router to its default state i.e., username, IP address, and password.

When you’ve connected with the router IP 10.0.0.1 admin page, the 10.0.0.0.1 page doesn’t exist because of the extra period and zero, you can change the settings including the IP address. 

You can use any IP address between 10.0.0.0 and 10.255.255.255. Hence, the commonly mistyped addresses: 10.0.0.0.1, 10.0.01, 1.0.0.0.1 or https://10.0.0.0.1 do not work. 

Difference In Set-Up:  Router Brands

Some brands like Cisco, Arris International, and Technicolor use 10.0.0.1 as their IP for router setup. It often leads to confusion as many routers use 10.0.0.1 for setup — and the IPv4 addresses only have four numbers.

Remember, you can change the IP address from the admin panel. So simply reset your router and type the default IP address to change the IP to something you can remember. 

Pro Tip: Change the default username and password to improve your network security.