10.0.0.2 - Login Admin

To access the admin page type 10.0.0.2 into your web browser's address bar or click on the link below.

Based on your local ip address, this should be your router admin ip address. This is only the case if you are in the same network as your wifi router.

Default logins for 10.0.0.2

IP Address:10.0.0.2 Username:admin Password:admin
38%
IP Address:10.0.0.2 Username:admin Password:zoomadsl
25%
IP Address:10.0.0.2 Username:zoomadsl Password:admin
25%
IP Address:10.0.0.2 Username:admin Password:epicrouter
13%
IP Address:10.0.0.2 Username:admin Password:password
0%

Using A Router With The 10.0.0.2 IP Address

IPV4 or Internet Protocol version 4 has set aside a few IP addresses for private use, so they don’t receive traffic from the Internet and are only able to work within a local network.

10.0.0.2 is one of these private addresses and is set on many routers as a default gateway.

In case there are any connection problems or if you want to change the router settings — access the router’s 10.0.0.2 admin panel. You can reach it by entering http://10.0.0.2 in the browser’s address bar.

If you’d like to know how to access the 10.0.0.2 Setup section, read on.

10.0.0.2 Login Steps

1 Find Router IP Address

You don’t require an internet connection to reach the 10.0.0.2 admin login page, but you need to ensure that the router is connected to your device (PC, laptop, etc.) either wirelessly or with an Ethernet cable.

To ensure that the router’s IP is 10.0.0.2, check its backside or the box it came in. Otherwise, follow the steps:

- Open Command Prompt from the Start menu and enter ipconfig

- Look for the section that says Local Area Connection

- You’ll find the router IP labeled as Default Gateway underneath that section

2 My Router IP Address And Connectivity

Now, use the following guide to help you access the 10.0.0.2 admin console:

- Ensure that the device connected to the router

- Open your browser

- Enter 10.0.0.2 or http://10.0.0.2  in the address bar – remember that these are all zeros

- Enter the default credentials on the login page to access the 10.0.0.2 setup page

- Possible usernames for your router could be blank, root, or admin

- The password field could be left empty, or try beadmin, root, or epicrouter

- If none of these work, check the device or its box for login info; otherwise a quick Google could help you

3 Configure 

Once you have access to the 10.0.0.2 admin panel:

- Change DNS, i.e., 10.0.0.2 to another private address to avoid conflicts

- Assign or change username and password of the 10.0.0.2 admin dashboard or Wi-Fi connection

- Set parental controls and user restrictions, etc.

Top Brands Using 10.0.0.2

Brands that use http://10.0.0.2 include Gemtek, Jaht, Zoom, and Bec Technologies.

Reset And Troubleshoot Router

If you face issues connecting to the 10.0.0.2 setup page, do the following:

Ensure that your device is connected to the network.

Be very careful when entering 10.0.0.2, http://10.0.0.2, or https://10.0.0.2 —remember these are zeros and not the letter o.

If the default credentials have been changed, and you don’t remember them, do a hard reset  by pressing the small button on the router, hold it for a few seconds.

If the browser still shows with an error page, use a different browser or delete cookies and cache of current browser and try again.

If nothing works, get your router checked by an expert.

Common Misspelling – 10.0.0.2 Vs. 10.0.0.0.2

It’s easy to get confused by all these zeros and enter an extra zero or an uppercase ‘O’. So you end up with 10.0.0.0.2 or 1O.O.O.2 instead of 10.0.0.2 – in both cases, you’d get an error.

FAQ IP adddress

1. What is 10.0 0.2?

10.0.0.2 is a default IP address. The IP address always contains 4 sets of numbers ranging between 0 and 255. This is because each device connected to the internet is supposed to have a unique address. So, the first three sets are the network id, and the last set is the device id. In 10.0.0.2 the network id is 10. and the device id is .0.2

2. How to log in to 10.0 0.2 / How to login into 10.0 0.2 / How to use 10.0 0.2

First, type 10.0.0.2 in your browser’s address bar. Then, enter username and password, and then click OK or Login.

3. What are the (most common) default logins for 10.0 0.2?

The most common default logins for 10.0.0.2 IP address are Username: admin, Password: admin

4. What is the (most common) default username for 10.0 0.2?

The most common default username for 10.0.0.2 address is admin

5. What is the (most common) default password for 10.0 0.2?

The most common default password for 10.0.0.2 address is admin

6. 10.0 0.2 - How to Access Router IP Address?

First, type 10.0.0.2 in your browser’s address bar, Then, enter your username and password, and then click OK or LOGIN. The most common default logins to access 10.0.0.2 are - username: admin, password: admin

7. How to login into 10.0 0.2 / Hot to go to 10.0 0.2 / How to use 10.0 0.2

First, type 10.0.0.2 in your browser’s address bar, Then, enter your username and password, and then click OK or LOGIN. The most common default logins to access 10.0.0.2 are - username: admin, password: admin

Background item Background item