- Login Admin

To access the admin page type into your web browser's address bar or click on the link below.

Based on your local ip address, this should be your router admin ip address. This is only the case if you are in the same network as your wifi router.

Default logins for

IP Address: Username:admin Password:admin
IP Address: Username:- Password:admin
IP Address: Username:'randomly generated'' Password:admin
IP Address: Username:admin Password:-
IP Address: Username:admin Password:motorola

1 Login Steps

If you have a router that uses the IP address, then follow these simple steps to access your router’s admin panel. 

Check whether the connection is made correctly, check the Power, WAN, LAN, and WLAN lights are on. For the power button, the light should remain steady. The next three lights or diodes should blink or flash continuously. After a successful installation, move on to the following steps.

Open a web browser and type the IP address An error message may appear, if this happens then,192.168.10.l is not your router's correct IP address. It's time to check for any misspellings. Sometimes, the autocomplete feature of your browser is misleading. You can find out how to locate your router's correct IP address in this article.

If you have forgotten your username and password, then you can recover them by following these simple instructions.

If you have never changed your username and password, we suggest that you take a look at our default router usernames and passwords list.

Once you access the router's admin, you can configure your router exactly how you want.


Can’t connect to your router? 

Stop fretting, there is some logical explanation or reason behind this. We have listed some of the most common reasons because of which you are restricted access below.

Invalid IP Address

IP addresses aren’t very easy to enter. If you enter any erroneous digit or any unwanted character, it takes you to a different page or does not load at all. To avoid this mistake, simply copy and paste the IP address into the address bar. Only this can ensure that you have entered the correct IP address.

Missing Ethernet Cable

Most routers need some physical connection before gaining access to the admin panel. Ethernet cables are the most common form of physical connection used to gain access to the router IP address. It is a simple process of connecting the computer to the router, and takes only a few seconds. 

Faulty Router

If you still cannot connect to then there is a possibility that your router isn’t working the way it should. These complex devices may cause complications if any component is not in place. To rule out this possibility, contact your router’s manufacturer. But know this, not all manufacturers use the 192 168 10.1 IP Address. 

What Does a IP Address Do?

While it’s easy to get online these days, what do you do if you can’t access web pages? Sure, it’s not the dial-up days anymore, but internet access can still be tricky at times. So, how do you pinpoint the issue? Is your ISP to blame, or is it something with your router?

When pinpointing router issues, looking at your own private IP address is a good way to start things off.

The IP Address is one you will see while setting up a router or configuring any networking device. These devices may include webcams, VOIP telephones, and DVRs. 

What is the use of the IP Address?

There are over 26 Billion devices connected to the internet today. However, only 4 billion IP addresses are accessible. Not every device connected to the internet can have its IP address.

However, without an IPv4 address, there is no way to identify devices on a network. To prevent IPv4 exhaustion, the Internet Assigned Numbers Authority (IANA), an American non-profit that overseas offered a universal solution–Private IP Addresses. It’s an IP address for your router, and each one has its own!–A Private IP Address

The difference between public and private IP Addresses is their access limitation. Where accessing a public IP address follows no strict protocol, access to a private IP address may seem challenging. So, addressing devices on a public network requires critical thinking. 

The 192 168 10.1 address is a particular type of address that doesn’t need to be coordinated with the IP address registry. Unlike public addresses, there are multiple devices with the IP address in various private networks. The only considerable aspect is to avoid an IP Address collision in the same private network. To remap the 192 168 10.1 IP Address, you use a process called NAT. In short, is simply a gateway address used by manufacturers to provide access to the admin panel of their routers. 

Internet Service Providers are switching to a newer version of the Internet Protocol, which may deem the existing addresses obsolete. The IPv6 contains 340,282,366,920,938,463,463,374,607,431,768,211,456 unique IP addresses. Even if every person in the world opens a web page, you still will not run out of numbers. 

In short, the address offers access to a router’s admin panel. Many routers use the for the home network. Whether you buy from manufacturers like TRENDnet, D-Link, or Motorola, you can come across this issue.

1 Getting Connected

The general installation process for a TRENDnet or any other wireless router follow these steps:

Disconnect the modem from the power supply. 

Connect an ethernet cable on the back of the modem.

Connect the “WAN” jack on the back of the wireless router. 

Plug another ethernet cable to the “LAN” jack on the back of the router and connect it to the computer. 

Connect cable modem and router to an electrical outlet.

Turn the power button on the back of your device to ON position.

FAQ IP adddress

1. What is 192.168 l 0? is a default IP address. The IP address always contains 4 sets of numbers ranging between 0 and 255. This is because each device connected to the internet is supposed to have a unique address. So, the first three sets are the network id, and the last set is the device id. In the network id is 192 and the device id is 168.10.1

2. How to log in to 19168 l 0 / How to login into 19168 l 0 / How to use 19168 l 0

First, type in your browser’s address bar. Then, enter username and password, and then click OK or Login.

3. What are the (most common) default logins for 192.168 l 0?

The most common default logins for IP address are Username: admin, Password: admin

4. What is the (most common) default username for 192.168 l 0?

The most common default username for address is admin

5. What is the (most common) default password for 192.168 l 0?

The most common default password for address is admin

6. 192.168 l 0 - How to Access Router IP Address?

First, type in your browser’s address bar, Then, enter your username and password, and then click OK or LOGIN. The most common default logins to access are - username: admin, password: admin

7. How to login into 192.168 l 0 / Hot to go to 192.168 l 0 / How to use 192.168 l 0

First, type in your browser’s address bar, Then, enter your username and password, and then click OK or LOGIN. The most common default logins to access are - username: admin, password: admin

Background item Background item